Programmable Controller for internal PTZ cctv cameras using RS485
A programmable controller for PTZ (pan, tilt, zoom) cameras including our EYES range of internal speed dome cameras. Supports Pelco D-2400, Pelco P-4800, Pelco P-9600 and generic EYES protocol. Connected via industry standard RS485. (Price does not include camera).
- Programmable controller for PTZ or speed dome cameras.
- Compatible with Pelco D-2400, Pelco P-4800, Pelco P-9600 and generic EYES protocol languages.
- Connected via simple 2 wire RS485 network
- Controls up to 99 cameras
- Up to 128 programmable preset points including the zom function when fitted.
- Programmable tours of up to 16 preset points.
- (Price does not include camera)
An alternative to plugging your PTZ camera into your DVR recorder this is a lovely little programmable controller for PTZ camera systems. Using this controller you can programme up to 128 preset points allowing the camera to move there at the press of a button. These points also control the zoom function when fitted to a camera.
Up to 16 different preset points can be programmed into a tour with the camera automatically moving from point to point.
The controller can control up to 99 different cameras on the same 2 wire RS485 network.
Camera tilt and pan speeds can be changed in 8 increments from slow to fast.
The camera can be programed to follow a simple arc between 2 preset points.
This really does bring top end cctv to the masses! No longer do you have to spend thousands of pounds on controllers and equipment. A multi-camera system including controller is achievable for under £1,000. Simple to set up and needing no special tools we were bowled over when we first saw this product range.
Supports industry standard Pelco D-2400, Pelco P-4800, Pelco P-9600 protocols as well as generic EYES protocol.