How to use CAT5 wiring for CCTV

In recent years the invention of the video balun has meant CAT5e cable can be used to connect CCTV cameras to CCTV DVR recorders. This page shows you how to make the right connections. All the connections can be made using only a screwdriver, no need for special tools or fiddly components. Before you start there are a couple of important things to know.

What components do I need?

Video is transmitted along the CAT5e cable using a pair of video baluns, one at the DVR end, one at the camera end. Power is transmitted using using screw in DC plugs and sockets. The plug goes at camera end the socket at the DVR end. Locate the camera power supply close to the DVR.

Use the correct type of CAT5e cable

You must use pure copper CAT5 cable. Some CAT5 cable is not pure copper but copper coated aluminum or CCA. Don't rely on the label or what the retailer says, actually check the cable yourself. CCA tends to break easily when bent and you can scrape the copper off to reveal silver coloured metal underneath. All the cable we sell is pure copper external grade.

Don't exceed the maximum cable run

The maximum distance video signal can be transferred with our video baluns is approximately 300 metres but we would suggest a maximum distance for 12 volt transfer when using our suggested wiring (which combines 3 pairs of wires to transfer the 12 volt power) of approximately 60 metres.

Use a colour convention and check carefully

It is important to check your wiring carefully. Choose a colour convention and stick to it. In the examples below we have used blue for video signal and solid colour for +ve.

You need to run 1 length of CAT5e cable from the DVR recorder to each camera. The cable is going to do 2 jobs. One pair of wires will handle the video signal, the other 3 pairs of wires will be combined to take 12 volt power from the transformer located next to the DVR to the camera.

Firstly identify the polarity for all your connectors

Separate the 4 pairs of wires in the Cat5e cable. In this case we are going to use the blue pair for transferring video signal from the camera to the DVR. Keep this pair twisted, to reduce the chance of interference.

The green, brown and orange pairs are going to be used to take 12 volt power from the transformer to the camera. We use 3 pairs of wires combined to reduce the risk of voltage drop at the camera. Having unwound the wire use the solid colour for 12 volt +ve and the white with coloured trace for 12 volt -ve.

Here we can see the cables inserted into a video balun and a power plug. Remember to strip back the outer sheath to reveal the copper conductor before pushing into the fittings and tightening the connector with a small screwdriver. Note how we have combined the 3 pairs of wires for the 12 volt DC fitting.

Be aware the DC power fittings are different for the DVR end of the cable and the camera end of the cable. The DVR end requires a female socket to take the 12 volt power from power supply.

The camera end requires a male DC plug To take 12 volt power to the camera

It is important to protect the fittings from water so we recommend using weather proof junction boxes by each camera.

/* */